€ 2.18
€ 2.69
Laidai su RJ25 jungtimis tinkami Makeblock elektronikos moduliams.
Komplekte 4 vnt.
Laido ilgis: 20 cm
Pirkti
Turime sandėlyje
€ 2.79
€ 3.29
Laidai su RJ25 jungtimis tinkami Makeblock elektronikos moduliams.
Komplekte 2 vnt.
Laido ilgis: 50 cm
Pirkti
Susisiekti dėl likučio
€ 34.94
€ 41.99
Makeblock mCore - valdymo plokštė sukurta remiantis ARDUINO Uno, integruotas mikrovaldiklis ATmega328.
Programavimuoti galima Scratch 2.0 pagrindu sukurtoje grafinėje programoje mBlock. Taip pat programuoti galima Arduino IDE.
mCore - idealus pasirinkimas pradedantiems mokytis elektronikos ir programavimo pagrindų.
Keturi plokštėje integruoti RJ25 lizdai palaiko įvairius jutiklius. Jutikliai greitai ir paprastai prijungiami RJ25 jungtimis - nereikia nieko lituoti.
**mCore** plokštėje taip pat yra integruotas šviesos jutiklis, RGB LED lemputė ir garsiakalbis.
Automatiniai saugikliai apsaugo plokštę nuo viršįtampio.
Darbinė įtampa: 3.7-6V DC
Išmatavimai: 90 x 79 x 18 mm
Makeblock valdymo plokščių lizdai yra sužymėti spalvomis, kurios identifikuoja elektronikos modulius iš jų funkcijas:
## Susijusios prekės
[products 2653 2654 3273]
Pirkti
Turime sandėlyje
€ 32.67
Komplektą sudaro
1m LED juosta RGB, 5V, 60 LED/m, 5050+WS2812B, IP67 Neopixel
1vnt Mikrovaldiklis Arduino Pro Mini 3.3V 8MHz
1vnt Akumuliatorius 18650 3.7V 3400mAh Li-ion lituojamas Panasonic NCR18650B
1vnt Krovimo modulis TP4056 Akumuliatoriui 18650 Li-ion 3.7V
Pirkti
Susisiekti dėl likučio
€ 9.68
More resistant to wear and tear, greatly extending the life cycle of the ball screw life increased several times.
More high temperatures in harsh environments without distortion to ensure stability.
Smoother curve ball ball screw drive designers work more smooth and natural.
Packing Included
1 X Rod Lead Screw
1 X Brass Nut
Pirkti
Turime sandėlyje
€ 18.99
The Me Stepper Driver V1.0 is a easy to use stepper motor driver board based on chip A4988, generally used to drive bipolar stepper motors precisely. It is perfect for 3D printing, CNC, Makeblock Music Robot as well as a lot of other applications where it's necessary to control precise movement.
The A4988 is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes. Plus, we add a on-board DIP Switch and a on-board potentimeter, so you can change step modes and the current of motor easily.
Features:
A4988 stepper driver chip
Compatible with 4 wire bi-polar stepper motors
A potentiometer to control the current of the stepper motor
A on-board DIP Switch(2 POS SIDE ACTUATED) support full, half, quarter, eighth, and sixteenth-step modes
A buildin fuse protects board and chip from over current or any shortage by any reasons
A on board heat sink helping heat dissipation allows driver chip current up to 1.35A
Easy to use
Comes with Arduino library for easy programing
A power indicator
Easy wiring with 6 Pin RJ25 interface
Labeled with red tag and compatible with Me BaseBoard
2.54mm breakout pins for connecting with jumper wires
16mm interval M4 mounting holes, compatible with Makeblock beams
Specification:
Max current: ±1.35A
Max motor drive voltage: 25V
Note: Me BaseBoard max supply voltage 12V
Logic voltage: 5V
Dimensions: 48mm*24mm(Length × Width)
Part List:
1 x Me Stepper Motor Driver V1.0
1 x HT3.96-4P
1 x heat sink
Pirkti
Turime sandėlyje
€ 10.95
Makeblock Megapi Stepper Motor Driver - elektronikos modulis, skirtas valdyti žingsninius variklius (stepper motor).
Maksimali srovė 2,5A.
Tinkamas vaėrikliams, dirbantiems pilnu, 1/2, 1/4 1/8 / 1/16 arba 1/32 žingsnio režimu.
Techniniai parametrai:
Motor driver: DRV8825
Output current:1.75A (with proper heatsinking at 24 V and 25°C)
Max current: 2.5A (pay attention to heat dissipation)
Drive voltage: 8.2V-45V
Note: MegaPi max supply voltage 12V
Logic voltage: 5V
Dimensions: 1.5 x 2.0cm
Compatible with 4 wire bi-polar stepper motors
Capable of driving one stepper motor (green interface)
Color-code male and female pins ensure connecting with MegaPi correctly
A on board heat sink helping heat dissipation
Pirkti
Turime sandėlyje
€ 240.79
€ 484.00
Introduction:
This Geeetech I3 pro B 3D printer is designed and manufactured by Shenzhen Getech Co., Ltd based on Geeetech I3 pro, except its simple assembly, easy debugging and more stable performance, compared with the I3 pro, I3 pro B features a newly added potential for 3D printing—support 5 types of filament: ABS, PLA, Wood-Polymer, Nylon and flexible PLA., create flexible hinges, joints, shaped parts; enable you to get the most out of your 3D Printer.
Features:
Multiple filaments compatible: ABS/PLA/Flexible/PLA/Nylon/Wood-Polymer, making 3D printing creativity more flexible.
New GT2560 control system, a perfect combination of Mega2560+Ramps1.4.
Further simplified structure means fast assembly and easy adjustment, which saves you both time and energy
Enhanced stability and reliability: 8- mm-thick acrylic plates and all metal carriages ensures more stable printing.
Paired with LCD 2004 panel & SD card reader ,support stand-alone printing.
Pirkti
Susisiekti dėl likučio
€ 8.71
Mažas „Raspberry Pi Pico“ modulis su patentuotu „Raspberry RP2040“ mikrovaldikliu. RP2040 yra dviejų branduolių „ARM Cortex M0 +“ lustas, kurio dažnis yra 133 MHz. Modulis turi 264 kB SRAM ir 2 MB „Flash“ atminties. Sistemoje yra 26 GPIO kaiščiai, kurie dirba su 3,3 V įtampa ir temperatūros jutikliu. „Raspberry Pi Pico“ yra užprogramuojamas C / C ++ ir „MicroPython“ per „microUSB“ jungtį.
„Raspberry Pi Pico“ modulio kaiščiai
„Raspberry Pi Pico“ modulyje yra 26 kontaktai, kurie apima: 2x SPI, 2x I2C, 2x UART, 3x ADC 12-bit, 16x PWM. Papildomi 8 IO kaiščiai (PIO).
Maitinimas „Raspberry Pi Pico“
„MicroUSB“ jungtis naudojama maitinant ir palaikant „Raspberry Pi Pico“ plokštės ryšį su kompiuteriu, kad modulis veiktų teisingai, reikalingas 5 V maitinimas. Plokštė taip pat gali būti maitinama iš 1,8–5,5 V įtampos iš VSYS kaiščio, naudojant, pavyzdžiui, 3,7 V „Li-Pol“ arba 3x AA baterijas.
Raspberry Pi Pico“ programavimas
Raspberry Pi Pico“ yra užprogramuotas C / C ++ arba „MicroPython“. Norėdami įkelti programą į plokštę, palaikykite nuspaudę mygtuką BOOTSEL ir „MicroUSB“ laidu prijunkite „Raspberry Pi Pico“ prie kompiuterio. Modulis bus aptiktas kaip USB atminties įrenginys, vadinamas RPI-RP2, programos failą reikia vilkti ir įdėti į RPI-RP2 failą.
Darbo su „MicroPython“ pradžia
„Raspberry Pi Pico“ galima užprogramuoti prijungus jį prie kompiuterio per USB kabelį, sukeliant failus. Parengtas atsisiųsti UF2 failas padės jums pradėti naudotis „MicroPython“.
Atsisiųskite UF2 failą „Hello World“.
Paspauskite ir palaikykite mygtuką BOOTSEL ir prijunkite „Raspberry Pi Pico“ prie „Raspberry Pi“ USB prievado.
Nuvilkite UF2 failą į RPI-RP2 failą.
Pico bus paleistas iš naujo.
Atidarykite „Raspberry Pi 4B“ ir vykdykite komandas:
Lange turėtumėte pamatyti „Hello World“.
Specifikacija:
Sistema: Raspberry Pi RP2040
"Core": ARM Cortex-M0 + dviejų branduolių 133 MHz
SRAM: atmintis 264 kB
„Flash“ atmintis: 2 MB
Kaiščiai: 40 kontaktų / 23 skaitmeninis GPIO + 3 ADC kaiščiai
Sąsajos: 2x UART, 2x I2C, 2x SPI, iki 16 PWM kanalų
Maitinimo įtampa: 5 V (USB)
Loginės dalies darbinė įtampa: 3,3 V
Maitinimo / duomenų jungtis: „microUSB“
Matmenys: 51 x 21 mm
Pirkti
Turime sandėlyje
€ 7.02
€ 7.02
ATMega 32U4 running at 5V/16MHz
Supported under IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Pirkti
Susisiekti dėl likučio
€ 7.19
33 m. ilgio karščiui atspari lipni juosta tinkama PCB maskavimui, apvijų izoliavimui, 3D spausdinimui (PLA/ABS/PETG ir kt).
Puikus sukibimas su plastiku!
Atspari karščiui iki: 260°C
Plotis: 10 mm
Ilgis: 33 m
High temperature adhesive Tape for 3D Printing.
Excellent plastic adhesion!
Pirkti
Turime sandėlyje
€ 45.05
Karščiui atspari, lipni poliamido plėvelė Kapton patikimai sukimba su ABS, PLA, PETG plastiku, todėl yra puikus pagrindas 3D spausdinimui.
Atspari karščiui iki: 400°C
Plotis: 250 mm
Ilgis: 33 m
Plėvelė išlieka stabili plačiame temperatūrų diapazone 269° - 400° karščio.
Plati juosta leidžia padengti visą spausdintuvo pagrindą nepaliekant tarpų.
Plėvelė ilgai nesusidėvi, todėl gali būti naudojama ilgą laiką.
Kapton Heat Resistant Tape Roll For 3D ABS Printing.
Kapton and ABS adhere to each other very well, which has led to widespread use of Kapton as a build surface for 3D printers.
This Huge roll is perfect for covering the Hot plate in one pass and will last you a very very long time. It's a must-have if using ABS filament.
Pirkti
Turime sandėlyje
€ 7.50
€ 9.92
ATMega 32U4 running at 5V/16MHz
Supported under IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Pirkti
Susisiekti dėl likučio
€ 29.03
This module can display geometric figures and characters. You can send commands through serial port to display.
Features:
Controlled through serial port
Adjustable backlight
Build-in fonts
16mm interval M4 mounting holes, compatible with Makeblock beams
2.54mm pin holes for connecting with Dupont wire
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming
Specification:
Rated Voltage: 3.3V - 5.5V
Rated Current: 80mA
Storage: 2M
Size: 2.2Inch
Resolution ratio: 320x240
Baudrate: 2400 - 256000
Pirkti
Susisiekti dėl likučio
€ 8.99
€ 9.68
Me 7-Segment Serial Display is a classic 4-digit common anode 7-segment display, it usually used to display numbers and a few special characters. You can easily use it in your robot project to show speed, time, the value of sensors, or scores. Me 7-Segment Serial Display is based on chip TM1637, you can control each segment and decimal point individually. Controlling each segment is not a complicated work, we have provided Arduino library for easy programming.
Features:
4 digit red alpha-numeric display and one decimal point per digit
Selectable brightness, you can see clearly even in daytime
16mm interval M4 mounting holes, compatible with Makeblock beams
2.54mmbreakout pins for connecting with jumper wires
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming
Specification:
Rated Voltage: 5V
Digital Bits: 4
Size:24x48x 32mm(Length x Width x Height)
Pirkti
Turime sandėlyje
€ 20.99
€ 29.03
This 2.4G Wireless Serial is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously. It uses the same the techology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a dongle to plug on your computer; a module to plug on the mCore, you can easily establish a wireless connection between the software mBlock and mBot.
Features:
Allow auto pairing, the same technology as wireless mouse,
USB Dongle support 32&64 bit Windows&Mac OS. Driver installed automatically
No signal interference when many mBots work simultaneously
Specifications:
Default Baud rate:115200
Communication distance: about 10 meters
Power supply: 5V DC
Dimension: 30mm20mm14mm
Part list:
2.4G Wireless Serial Module × 1
2.4G Wireless Serial USB × 1
Pirkti
Turime sandėlyje
€ 33.88
LED matrica 8x8 RGB. Programuojama, valdomas kiekvienas diodas atskirai, juoda plokštė (PCB), valdomas su Arduino, PIC, ir ARM mikrovaldikliais arba RF-IC-5V valdikliu.
Your browser does not support the video tag.
WS2812 ar WS2812B?
Juostoje naudojami nauji LED moduliai - WS2812B. Lyginant su senaisiais WS2812 (be "B"), nauji:
jungiami 4 kontaktais vietoj 6
šviečia ryškiau
sugedus vienam diodui toliau esantys nenustoja veikę (WS2812 visi užgęsta)
mažiau kaista
Komplekte
1vnt LED matrica 8x8 RGB
Informacijos šaltiniai
https://www.adafruit.com/product/2547
Pirkti
Turime sandėlyje