Paieška

3D spausdintuvo spausdinimo padėklo stiklas atsparus karščiui. (Heated Bed Borosilicate Glass) Išmatavimai: 213 x 200 x 3 mm. Borosilikatinis stiklas yra kietas, atsparus temperatūriniams šuoliams ir karščiui. Glass plate for 3D printer heated bed.

Specification: Step angle 1.8° Positions Accuracy ±5% Phase 2 Rotor Inertia 57gf-cm2 Weight 0.4kg Holding Torque 4.0kg.cm Rated Resistance/Phase 2.2±10%ohm Rated Current/Phase 1.5A Rate Voltage 3.3v Screw M8 Pitch 8MM Screw length 300MM

Heat tube 12V 40W, length 1 meter Thermistor 100K NTC B 3950 ±1% Teflon tube 1meter This 3D Printer J-head Hotend is for 1.75mm Filament

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). Features: Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information) Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed)

Strypelio ilgis - 30cm, skersmuo - 6mm. Guolio ilgis 19mm, skersmuo - 12mm.

More resistant to wear and tear, greatly extending the life cycle of the ball screw life increased several times. More high temperatures in harsh environments without distortion to ensure stability. Smoother curve ball ball screw drive designers work more smooth and natural. Packing Included 1 X Rod Lead Screw 1 X Brass Nut