€ 7.99
This is the temperature sensor based on chip DS18B20 consisting of a waterproof probe and long wire shape, which is perfect for immersive temperature detectionor detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
The original one includes three wires inside,we adjusted it into a 3-pinconnector so that you can use it simply with Makeblock Me Adapter. (there is no soldering required to connect to our Me BaseBoard just like below picture).
Features:
Waterproof
Uses 1-Wire interface- requires only one digital pin for communication
Stainless steel tube 6mm diameter by 35mm long
Arduino library for easy programming
Dimensions: Probe is 6mm in diameter and roughly 50mm long. Overall length (including wire) is 0.5 meter
Specification:
Power supply: 3.0V to 5.5V
Wide temperature range: -55°C to +125°C
High accuracy: ±0.5°C( -10°C to +85°C)
Pirkti
Turime sandėlyje
€ 3.59
Makeblock Me RJ25 Adapter gali konvertuoti 6P6C RJ25 jungtis į 2 bendrų signalų jungtis (kuriose yra elektros sąsajos ir signalo sąsaja: VCC, GND, S1, S2, SDA ir SCL). Adapteris gali būti naudojamas norint prijungti kitų gamintojų elektronikos modulius prie Makeblock Me serijos modulių.
Techniniai parametrai:
Operating voltage: 5V DC
Maximum current: 3A
Space between pins: 2.54 mm
Module size: 51 x 24 x 18 mm (L x W x H)
Two 3-pin anti-reverse base
Red LED is power indicator
Provide I²C port and two digital/analog ports
Pirkti
Susisiekti dėl likučio
€ 34.82
Me Bluetooth Module is designed to communicate with devices with buletooth function through specific software.We provide an Android App to use it. It is compatible with bluetooth 2.0 and 4.0. This module should be connected to PORT_5 on Makeblock Orion. If your device needs a passcode, please try 0000 or 1234.
Features
Support mobile device (Android/IOS device) to control electronic modules;
Support Scratch For Robot programming control the modules via Bluetooth;
Support Arduino IDE programming control, we also provide Makeblock Library for Arduino, easy programming;
Using RJ25 cable connect the Makeblock main board, super easy to wiring;
Modular installation, and compatible with LEGO Bricks;
Come with header, compatible with most of main boards in the market based on Arduino;
Specification
Operating Voltage: 5V DC power;
Version: Bluetooth 2.0 and 4.0 compatible;
Level Output Voltage: 5V/high, 0V/low;
Dimension: 52 x 24 x 16 mm (Length x Width x Height);
Pirkti
Turime sandėlyje
€ 13.82
Aprašymas
Makeblock Me Dual DC Motor Driver yra tobulesnė Me Motor Driver V2.1 versija. Tai reiškia, kad su RJ25 jungtimis Jūs galėsite naudotis dviem DC motorais 1A (2A daugiausia) galia. Procesorius ant IC yra TB6612 kuris yra efektyviausias MOSFET motorui su mažiausia perdegimo galimybe.
Specifikacijos
TB6612PNG motor driver IC with High efficient MOSFET-based H-bridges
Comes with Arduino library for easy programming
6 V to 12 V motor supply range
1 A maximum continuous current per motor (2 A peak)
Over-current protection
Easy wiring with RJ25 interface
Labeled with red tag and compatible with Me BaseShield or Me Baseboard
2.54mm breakout pins for connecting with jumper wires
Motor channels: 2
Minimum operating voltage: 6 V
Maximum operating voltage: 12 V
Continuous output current per channel: 1 A
Peak output current per channel: 2 A
Pirkti
Turime sandėlyje
€ 10.95
Makeblock Megapi Encoder/DC Motor Driver gali valdyti du nuolatinės srovės DC variklius.
16 smeigių, kad būtų galima tiesiogiai prijungti prie MegPi valdymo plokštės.
Apsauga nuo viršįtampos.
Techniniai parametrai:
Motor driver: TB6612FNG
Motor channels: 2
Minimum operating voltage: 6 V
Maximum operating voltage: 12 V
Logic voltage: 5 V
Continuous output current per channel: 1 A
Peak output current per channel: 2 A
Dimensions: 1.5 x 3.0 cm
Pirkti
Turime sandėlyje
€ 10.99
€ 11.89
This module is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data.
Features:
Self-calibration
I2C interface
2.54mm pin holes for connecting with Dupont wire
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming
Specification:
Rated Voltage: 5V
Digital resolution: 5 milli-gauss
Field range: -8 gauss to +8 gauss
Pirkti
Turime sandėlyje
€ 8.99
€ 9.68
Me 7-Segment Serial Display is a classic 4-digit common anode 7-segment display, it usually used to display numbers and a few special characters. You can easily use it in your robot project to show speed, time, the value of sensors, or scores. Me 7-Segment Serial Display is based on chip TM1637, you can control each segment and decimal point individually. Controlling each segment is not a complicated work, we have provided Arduino library for easy programming.
Features:
4 digit red alpha-numeric display and one decimal point per digit
Selectable brightness, you can see clearly even in daytime
16mm interval M4 mounting holes, compatible with Makeblock beams
2.54mmbreakout pins for connecting with jumper wires
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming
Specification:
Rated Voltage: 5V
Digital Bits: 4
Size:24x48x 32mm(Length x Width x Height)
Pirkti
Turime sandėlyje
€ 10.95
Makeblock Megapi Stepper Motor Driver - elektronikos modulis, skirtas valdyti žingsninius variklius (stepper motor).
Maksimali srovė 2,5A.
Tinkamas vaėrikliams, dirbantiems pilnu, 1/2, 1/4 1/8 / 1/16 arba 1/32 žingsnio režimu.
Techniniai parametrai:
Motor driver: DRV8825
Output current:1.75A (with proper heatsinking at 24 V and 25°C)
Max current: 2.5A (pay attention to heat dissipation)
Drive voltage: 8.2V-45V
Note: MegaPi max supply voltage 12V
Logic voltage: 5V
Dimensions: 1.5 x 2.0cm
Compatible with 4 wire bi-polar stepper motors
Capable of driving one stepper motor (green interface)
Color-code male and female pins ensure connecting with MegaPi correctly
A on board heat sink helping heat dissipation
Pirkti
Turime sandėlyje
€ 25.99
Makeblock Optical Encoder Motor-25 9V/86RPM pakuotėje su laidu, kuriuo lengvai prijungsite variklį prie Me Encoder Motor Driver.
Valdiklį galima valdyti programuojant kompiuterio pagalba arba prijungus prie valdymo plokštės (pvx. Makeblock Me Orion), naudojant laidą su RJ25 jungtimi.
Techniniai parametrai:
Rated Voltage: 6 V (DC)
No Load Current (A): ≤0.2
No Load Speed (RPM): 86±10%
Rated Load Torque (kgf.cm): 0.9
Rated Current (A): ≤0.55
Rated Load Speed (RPM): 64±10%
Total Weight: 112 g
Pirkti
Turime sandėlyje
€ 43.95
€ 45.99
Makeblock MegaPi - valdymo plokštė sukurta remiantis ARDUINO, integruotas mikrovaldiklis ATmega2560.
Programuojama Arduino IDE arba grafine programavimo kalba.
Taip pat suderinama su Raspberry Pi ir programuojama Python!
Tai puiki priemonė gilinti elektronikos ir programavimo žinias, idealiai tinka 3D spausdintuvams, CNC, robotikos projektams. Puikus pasirinkimas elektronikų varžyboms, įvairiems edukaciniams projektams.
MegaPi užtikrina skirtingų variklių suderinamumą.
Vienu metu galima valdyti 10 servo, 8 DC / 4 stepper variklius, maksimali galima apkrova 10 A.
#####**Techniniai parametrai:**
* Microcontroller: **ATMEGA2560-16AU**
* Input Voltage: **DC 6V-12V**
* Operating Voltage: **DC 5V**
* I/O Pins: 43
* Serial Ports: 3
* I2C Interface: 1
* SPI Interface: 1
* Analog Input Pins: 15
* DC Current per I/O Pin: 20mA
* Flash Memory: **256 KB**
* SRAM: 8 KB
* EEPROM: 4 KB
* Clock Speed: 16 MHz
* Dimension: 85 x 63mm
**Papildomai galima prijungti RJ25 jungčių modulį, turintį lizdus įvairiems jutikliams.**
##VIDEO
Pirkti
Turime sandėlyje
€ 34.94
€ 41.99
Makeblock mCore - valdymo plokštė sukurta remiantis ARDUINO Uno, integruotas mikrovaldiklis ATmega328.
Programavimuoti galima Scratch 2.0 pagrindu sukurtoje grafinėje programoje mBlock. Taip pat programuoti galima Arduino IDE.
mCore - idealus pasirinkimas pradedantiems mokytis elektronikos ir programavimo pagrindų.
Keturi plokštėje integruoti RJ25 lizdai palaiko įvairius jutiklius. Jutikliai greitai ir paprastai prijungiami RJ25 jungtimis - nereikia nieko lituoti.
**mCore** plokštėje taip pat yra integruotas šviesos jutiklis, RGB LED lemputė ir garsiakalbis.
Automatiniai saugikliai apsaugo plokštę nuo viršįtampio.
Darbinė įtampa: 3.7-6V DC
Išmatavimai: 90 x 79 x 18 mm
Makeblock valdymo plokščių lizdai yra sužymėti spalvomis, kurios identifikuoja elektronikos modulius iš jų funkcijas:
## Susijusios prekės
[products 2653 2654 3273]
Pirkti
Turime sandėlyje
€ 7.99
€ 8.47
Pirkti
Turime sandėlyje